Kohler MasterShower K-400-K 3/4" Thermostatic Mixing Valve Body
MasterShower© 3/4" thermostatic mixing valve, less volume control
Adjust your water temperature and pressure with this high-flow valve. It provides 12 gpm at 45 psi from a-3/4" inlet and its safety stop makes sure that water will not exceed 120°F.
- High-flow valve provides up to 12 gpm at 45 psi
- 3/4" inlet
- Thermostatic valve with separate temperature control allows bather to set precise temperature
- Safety stop ensures that water temperature does not exceed 120 degrees Fahrenheit
- MasterShower™ trim offers a wide variety of finishes
Features of the Kohler MasterShower K-400-K 3/4" Thermostatic Mixing Valve Body:
- 3/4" Thermostatic mixer less volume control
- Brass construction
- Wall-mount
- Brass valve body
- Single-handle control
- High-flow valving
- High-temperature limit stop for added safety
- Temperature-balancing mechanism
- Scald hazard prevention
- Screwdriver stops
- Crossflow prevention
- 3/4" NPT connections
Also Known As:
K.400.K
K 400 K
K_400_K
K400K
Single-handle wall-mount thermostatic mixer less volume control shall be of brass construction. Product shall feature a high-temperature limit stop, high-flow valving, brass valve body, temperature-balancing mechanism, and scald hazard prevention mechanism. The valve shall also feature screwdriver stops, crossflow prevention, and 3/4" NPT connections. Product shall be Kohler Model K-400-K-NA, K400-K-NA, K-400-K.
Required Accessory
K-403-K 3/4" Volume control valve (for use on bath and/or shower outlets)Installation Notes
The K-400-K thermostatic mixer valve requires separate K-403-K volume control valves for each bath and/or shower outlet.For bath-only or shower-only installations, a 3/4" NPT plug is required for the unused outlet.For installations with a diverter spout, a K-9663 twin ell is required between the valve and the spout.NOTE: All shower functions should be piped from the top outlet. The bottom outlet should be used only as a bath filler. If the shower functions are piped from both the top and the bottom outlets and are run at the same time, unacceptable temperature differences will result.Codes/Standards Applicable
Specified model meets or exceeds the following:
ASME A112.18.1CSA B125IAPMO/UPCASSE 1016Required Products for the Kohler MasterShower K-400-K 3/4" Thermostatic Mixing Valve Body
Recommended Products for the Kohler MasterShower K-400-K 3/4" Thermostatic Mixing Valve Body