Kohler MasterShower XVII K-669-KS 3/4" Thermostatic Mixing Valve Body with Stops
[K-669-KS, K.669.KS, K 669 KS, K_669_KS, K669KS]
Kohler MasterShower XVII K-669-KS 3/4" Thermostatic Mixing Valve Body with Stops
MasterShower© XVII 3/4" thermostatic valve
KOHLER© Performance Showering features an array of innovative technologies and design options that take showering beyond the ordinary to customized environments that delight the senses. This 3/4" MasterShower© XVII thermostatic valve, with its high-temperature limit stop for added safety, delivers a large 17.2 flow rate and precise, consistent temperature control.
- 3/4" inlet
- Thermostatic valve allows bather to set precise temperature
- Factory-calibrated comfort setting at 104 degrees Fahrenheit
- High-temperature limit stop allows you to preset a comfortable maximum temperature to eliminate scalding
- 17.2 gallons per minute (at 45 psi)
Features of the Kohler MasterShower XVII K-669-KS 3/4" Thermostatic Mixing Valve Body with Stops:
- 3/4" thermostatic mixer - less volume control
- Brass construction
- Wall-mount
- Single-handle control
- Brass valve body
- High-temperature limit stop for added safety
- High-flow valving
- Filter screens
- Temperature-balancing mechanism
- Scald hazard prevention
- Less volume control
- Integral stops
- Crossflow prevention
- 3/4" NPT connections
Also Known As:
K.669.KS
K 669 KS
K_669_KS
K669KS
Single-handle wall-mount thermostatic mixer less volume control shall be of brass construction. Product shall feature a brass valve body, high-flow valving, high-temperature limit stop for added safety, and temperature-balancing mechanism. Product shall feature integral stops, crossflow prevention, filter screens, and scald hazard prevention. Product shall be available with 3/4" NPT connections. Valve system shall be Kohler Model K-669-KS-NA, K669-KS-NA, K-669-KS.
Required Accessory
Optional Accessory
Installation Notes
Codes/Standards Applicable
Specified model meets or exceeds the following:
- The K-669-KS and K-679-KS thermostatic mixer valves require a separate volume control valve, K-671-K or K-681-K, for each bath and/or shower outlet.
- For bath-only or shower-only installations, an NPT plug must be installed in any unused outlet.
- The lower port of the thermostatic mixer is intended for use with a bath spout only. If a bath spout is not used with this product, the lower port must be plugged.
- For installations with a diverter spout, a twin ell, K-9663, is required between the valve and the spout. It is acceptable for the supply to the K-9663 twin ell to run from the top or bottom port through the volume control valve if the remaining unused port is plugged.
- ASME A112.18.1
- CSA B125
- IAPMO/UPC
- ASSE 1016
Required Products for the Kohler MasterShower XVII K-669-KS 3/4" Thermostatic Mixing Valve Body with Stops
We Appreciate Your Support
Recommended Products for the Kohler MasterShower XVII K-669-KS 3/4" Thermostatic Mixing Valve Body with Stops
We Appreciate Your Support
Files for the Kohler MasterShower XVII K-669-KS 3/4" Thermostatic Mixing Valve Body with Stops
- 650531322982 UPC/EAN:
Recently Viewed See More
Customers Who Bought the Kohler MasterShower XVII K-669-KS 3/4" Thermostatic Mixing Valve Body with Stops Also Purchased:
We Appreciate Your Support
